Item Detail:
- Brand: Redlake
- Model: Hycam ii 41-0066
Specs:
- FILM CAPACITY: 16mm x 400 feet acetate
base film or 16mm x 450 feet 4 mil. polyester
base film . - SPEED RANGE: 80 to 11 ,000 frames per
second (full frame). 200 to 22,000 frames
per second (half frame). 400 to 44,000
frames per second (quarter frame). - SPEED CONTROL: Electronic Servo control ,
provides regulation over entire speed range
to ± 1% or 1 full frame whichever is greater. - SPEED SELECTOR: Thumbwheel speed
selector switch in 10 FR.lSEC. increments.
Self-locking at each position . - ACCELERATION (TYPICAL): 1.50 seconds to
5,000 FR.lSEC., utilizes 75′ of film to reach
speed (nominal) . - EVENT SYNCHRONIZER: Thumbwheel
selector, 4 to 396 feet in 4 foot increments.
Accuracy ± 5% or better. - POWER REQUIREMENTS: MODELS:
41-0064, 41-0065 & 41-0066. 115V ± 10
VAC, 50/60 Hz. with 30A circuit. - MOUNTING PROVISIONS: Bottom surface
has standard 3/ 8″ – 16 tapped holes in 3
locations plus 4 No. 10-32 tapped holes for
mounting dovetail base plate. - DOOR ASSEMBLY: Hinge type, swings down
. 90° or may be removed for easy access to
film chamber. - FILM FOOTAGE INDICATOR: Door mounted
lever, spring loaded away from film spool.
When depressed manually the lever
indicates film remaining . - END OF FILM SENSOR: An infrared (IR)
sensor automatically stops the camera when
the end of film clears the sensor aperture. - SPOOL ADAPTERS: All Series 41 cameras
accept accessory adapters for use with 100
foot & 200 foot film spools which reduce end
of film chipping & shatter at high speeds. - CAMERA WEIGHT: 32 pounds, all models, less
lens and film.
Condition:
- Item may contain minor scratching and scuffing from normal use
- Unable to test due lack of equipment
