Audio-Technica AT-VM95E/H Headshell/Cartridge Combo Kit: Precision and Performance
Experience the perfect blend of precision and performance with the Audio-Technica AT-VM95E/H Headshell/Cartridge Combo Kit. This kit includes the renowned AT-VM95E dual moving magnet cartridge, premounted on the durable AT-HS6BK headshell, ensuring easy setup and outstanding sound quality. Whether you’re a seasoned audiophile or a vinyl enthusiast, the AT-VM95E/H offers an exceptional listening experience with minimal distortion and superior channel separation.
Engineered for accurate sound reproduction, the AT-VM95E/H features a 0.3 x 0.7 mil elliptical stylus and an aluminum pipe cantilever. These components deliver detailed audio and a wide frequency response, making every record come to life with clarity and richness. The half-inch mount compatibility ensures easy installation on a variety of turntables.
Key Features
- Dual moving magnet cartridge premounted on the AT-HS6BK headshell
- 0.3 x 0.7 mil elliptical stylus for detailed sound reproduction
- High output voltage of 4.0 mV for dynamic audio performance
- Exceptional channel separation of 20 dB at 1 kHz for clear stereo imaging
- Wide frequency response of 20-22,000 Hz
- Easy installation with half-inch mount compatibility
Technical Specifications
| Specification | Details |
|---|---|
| Frequency Response | 20-22,000 Hz |
| Channel Separation | 20 dB at 1 kHz |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
| Stylus Construction | Bonded round shank |
| Recommended Load Impedance | 47,000 ohms |
| Coil Impedance | 3.3 k ohms (1 kHz) |
| DC Resistance | 485 ohms |
| Coil Inductance | 550 mH (1 kHz) |
| Output Voltage | 4.0 mV (1 kHz, 5 cm/sec.) |
| Output Channel Balance | 2.0 dB (1 kHz) |
| Stylus Shape | 0.3 x 0.7 mil elliptical |
| Cantilever | Aluminum pipe |
| Static Compliance | 17 x 10 – 6 cm / dyne |
| Dynamic Compliance | 7 x 10 – 6 cm / dyne (100 Hz) |
| Mounting | Half-inch |
| Dimensions | Cartridge 17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D; Cartridge & Headshell 21.2 mm (0.83″) H × 21.4 mm (0.84″) W × 62.4 mm (2.46″) D |
| Accessories Included | Two 11 mm installation screws, two 8 mm installation screws, two washers |
| Model | AT-VM95E/H |
| Mounting Feature | Half-inch mount |
| Recommended Load Capacitance | 100 to 200 pF |
| Replacement Stylus | AT-VMN95E |
| Stylus Size | 0.3 x 0.7 mil |
| Type | VM Stereo Dual Magnet |
| Weight | Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz) |
| Wire Used for Coil | T.P. Copper |
Pre-mounted Cartridge Installation
-
Preparing the Headshell/Cartridge: Before installation, ensure the stylus cover is securely in place. Handle the headshell and cartridge carefully as they are very fragile, and damage can often be costly.
-
Mounting the Headshell/Cartridge: Attach the headshell to the tonearm using the supplied hardware. Tighten the headshell nut securely, but avoid overtightening to prevent damage.
-
Setting Tracking Weight and Bias: Initially, set the tracking weight for balance. Adjust the tracking weight to the recommended range of 1.8-2.2g (2.0g standard) to ensure optimal performance and minimal record wear. Set the anti-skate or bias to match the tracking force.
-
Aligning the Cartridge: Use a tracking alignment gauge to ensure the cartridge is properly aligned. Adjust the cartridge position as needed to minimize distortion and achieve the best sound quality.
-
Final Adjustments: Once aligned, double-check the tracking weight and bias settings. Fine-tune the adjustments to achieve the best possible audio performance. Ensure that all connections are secure and that the tonearm is balanced correctly.
-
Tonearm Height Adjustment: If possible, adjust the tonearm height to ensure it is parallel with the record surface during playback. This adjustment can help optimize sound quality based on the specific design of the headshell and cartridge.
Read More
