• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminum platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
,
Type: Belt drive turntable, fully automatic
Motor: DC motor
Drive Method: Belt drive
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Wow and Flutter: Less than 0.25% (WTD)
Signal-to-Noise Ratio:>55 dB
Output Level:PHONO: 4.0 mV nominal at 1 kHz, 5 cm/secLINE: 252 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
Power Consumption: 1.5 W
Dimensions: 400 mm (16″) W x 110 mm (4.3″) H x 330 mm (13″) D
Weight: Approx. 2.9 kg (6.4 lbs)
Effective Arm Length: 220 mm (8.7″)
Overhang: 18 mm (0.71″)
Tracking Error Angle: Less than 2.0°
Replacement Stylus: AT-VMN95C (sold separately)
Replacement Belt: AT-LP70X exclusive belt (sold separately)
,
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m / 3.3′)
• AC adapter (Approx. 1.5 m / 4.9′)
