Audio Technica AT4041

Original price was: $329.00.Current price is: $65.80.

SKU: AT4041 Category: Tag:

Audio Technica AT4041

This premium electret condenser microphone is engineered to meet themost critical acoustic requirements of professional recording, broadcastand live sound. The AT4041 cardioid studio condenser microphonefeatures a smooth, extended frequency response with a slight rise in thehigh-frequency region and a transformerless output for very highSPL-handling capability. A unique combination of audio excellence andmoderate cost, the AT4041 is a rugged microphone housed in a case ofturned brass with black chrome plating for durability and lowreflectivity. The element back plate holds a fixed charge and has beenaged to provide energy stabilization. The surface of the back plate isprecision milled to ensure maximum charge linearity, resulting in areduction in both frequency response peaks and diaphragm break-updistortion.

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequencydistortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensurecompliance with A-T’s stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 121 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
SWITCH Flat, roll-off
WEIGHT 4.2 oz (120 g)
DIMENSIONS 6.28″ (159.5 mm) long,
0.83″ (21.0 mm) body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8″-27 threaded stands; AT8159 windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE S1